Use Peel Base under your Dip Powder to avoid having to soak or file off.  Water based and easy to use.  Use more Peel Base to make your dip pop off easier and less to make it adhere better.  You may need to use trial and error with your application to get it just right for your situation. 15 ml 

*It is recommended that you use Peel Base over a shiny surface, such as a Gel or Dip Top coat.  (Follow instructions for your Dip or Gel liquids to achieve this).

THIS PRODUCT CANNOT BE USED IN PLACE OF A DIP OR GEL BASE. Additionally, this product can cause cracking of the dip/gel placed on top. This product is mainly used for those who want to easily remove dip or gel products and do Mani’s more often. 

Instructions:

TO USE ON NAKED NAIL: (Note that your natural nail has oils and can deter the product from staying on.  Also, using over your natural nail and not removing properly can damage your nail plate.)

1.  Apply 1 to 2 thin coats after prepping the nail.  Make sure to let dry in between coats.  Be sure to avoid the sides and edge of your nails. 

2.  Apply your dip powder or gel process.

3.  Using it only in the center of your nail may help the dip to stay on longer.  

REMOVAL INSTRUCTIONS: 

1.  File edges of your dip/gel nail.  Quickly dip your finger into acetone or let soak in a bowl of hot water, gently lift the edge and simply pop off.  

 TO USE WITH BUILDER GEL METHOD:

1.  Apply your builder gel process.

2.  Finish with a coat of No Wipe Gel Top Coat and cure.

3.  Apply 1 to 2 thin coats of Peel Off Base where you need it most.  (Stay clear of those areas that come off easily).  If you use more than 1 coat, be sure to let it dry fully between coats.

4.  Apply your dip powder or gel process.

5.  Same removal as above.